The Wulfe heat pump is made by the world’s largest appliance manufacturer and is made to European and Australian standards.

The reason that Wulfe appears to be so cost effective is because it is the worlds biggest selling heat pump, as rated by Euromonitor!

The Wulfe system has been manufactured for over a decade and has been sold in China, Europe and now in Australia and New Zealand. It is a very mature product and has excellent reliability.

The Wulfe heat pump is connected with a 10 Amp plug and cord. This enables the system to be connected to a standard weatherproof power point that is on a common power circuit.

The system’s current draw is only 2.5 Amps, so it can be run on an extension cord while you wait for an electrician to attend.

Due to the advanced design of the Wulfe refrigeration circuit, yes you can lay them down for transport to site.

Once installed, there is no need to wait to allow the system to “settle” before starting.

The control system on the Wulfe system is very easy to program and does not require an electronics degree. The ACTIV8 app was designed by a tradesman, for tradesmen and is a simple step-by-step process.

Wulfe heat pumps are similar to a split air conditioning system and make a similar amount of noise. Whilst daytime operation is never a noise issue, any noise at night can be problematic so we always recommend using the systems timers to limit running hours between 6am and 10pm to ensure that neighbours are not affected.

Wulfe heat pumps are available from all Plumbing Plus outlets Australia wide. Go to plumbingplus.com.au/member-locator to find your nearest stockist.

At Wulfe, we understand that many regions in Australia have poor water quality that will affect anode life and ultimately lead to premature tank failure. This is why all Wulfe systems come with 2 full length anodes for maximum protection.